Table of Contents
Advertisement
.
SETUP
until desired feature
is heard (see list at
right).
2.
SKIP or
until desired selection
is heard.
3.
SETUP
to set selection and
move to next menu
option.
- OR -
PLAY
to set selection and
exit menu.
NOTES:
. The message alert tone will
beep only if all the conditions
below are met:
Answering system is on
Message alert tone setting is
on
There are new messages
2. Press and hold
REPEAT to increase
or decrease the remote
access code number by 0.
Answering system operation
Changing feature options
You can change how the answering system oper-
ates. Press SETUP repeatedly to hear each feature.
When you hear the feature you want to modify
press
Press SETUP to set selection and move to next
menu option, or press
Feature options
System announces:
REPEAT
"Number of rings,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP."
Options: 2/4/6/toll
saver
"Base ringer," cur-
rent setting, then "To
change the setting
press SKIP or REPEAT;
to continue setup,
/STOP
press SETUP."
Options: high/low/off
"Remote access code,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP."
Options: (select two-
digit code) 19
"Message alert tone,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP." Options:
on/off
SKIP or
Press any base key (except RECORD,
HANDSET LOCATOR) to temporarily silence the message alert tone. If
you press and hold
message alert tone will be temporarily silenced. The message alert tone
will be re-activated with the next incoming message.
SKIP or
REPEAT to change the setting.
(default settings underlined).
Feature description:
Choose number of rings before the sys-
tem answers a call. When toll saver is
active, the system answers after two rings
if you have new messages, and after four
rings if you have no new messages. When
retrieving messages from a long distance
call, you may disconnect your call after
three rings so that there will be no long
distance charge incurred.
Choose telephone base ringer vol-
ume to high or low level, or turn the
telephone base ringer off.
Select a two-digit number (0-99) for
remote access from another telephone
(page 42).
When on, the telephone beeps every
0 seconds when there are new mes-
sages.
DELETE you will delete all old messages and the
38
STOP to exit.
PLAY/
ANSWER ON and
Advertisement
Table of Contents
