Installation Part 1 - Mounting Instructions Rear End - Tunturi Pure ROW 8.1 Owner's Manual

EN

Installation part 1 - Mounting instructions rear end

CAUTION CAUTION CAUTION CAUTION
Assemble the equipment in the given order.
⇒
1
2
3
10
Install the rower seat (3) rower seat (3) rower seat (3) rower seat (3) onto the seat rail
(2) (2) as shown. (2) (2)
NOTE NOTE NOTE NOTE
The rail rear end has two
⇒
mounting holes.
For the next assembly step, you will need:
rear leg (11) rear leg (11), rear leg (11) rear leg (11)
•
2x rear seat rail bumpstops (9) rear seat rail bumpstops (9) rear seat rail bumpstops (9), rear seat rail bumpstops (9)
•
2x rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13),
•
2x washer (5) washer (5), washer (5) washer (5)
•
seat rail bracket (12) seat rail bracket (12),
seat rail bracket (12) seat rail bracket (12)
•
rubber end cap (10), rubber end cap (10),
rubber end cap (10), rubber end cap (10),
•
internal seat rail bracket (22) internal seat rail bracket (22)
internal seat rail bracket (22) internal seat rail bracket (22)
•
With the seat already installed on the rail,
thread the rear rubber bumpstops (9) rear rubber bumpstops (9) onto
rear rubber bumpstops (9) rear rubber bumpstops (9)
the end of the seat rail (2) as shown.
seat rail seat rail seat rail
ROW 8.1