Using The Accessories - AEG KS8404021 User Manual

Hide thumbs Also See for KS8404021:
Table of Contents

Advertisement

16 www.aeg.com
4.
Select the Weight Automatic . Press
OK to confirm.
5.
Touch
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or

9. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature
• The core temperature
Only use the core temperature
sensor supplied or the correct re-
placement parts.
Using the core temperature sensor:
1.
Put the tip of the core temperature
sensor into the centre of the meat.
2.
Activate the appliance.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
or
to set the food
to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the sig-
nal.
With some programmes turn
over the food after 30 minutes.
The display shows a reminder.
The display shows the core tempera-
ture sensor.
4.
Press
or
onds to set the core temperature.
5.
Set the oven function and, if neces-
sary, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is dif-
ferent for the different quantities of
the food, the set oven temperatures
(minimum 120 °C) and the operating
modes. The appliance calculates the
end time in approximately 30 mi-
nutes.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
6.
When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically. Touch a sensor field
to stop the signal.
7.
Remove the core temperature sen-
sor plug from the socket and remove
the meat from the oven.
To change the core temperature,
press
.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and the plug of the core temper-
ature sensor.
in less than 5 sec-

Advertisement

Table of Contents
loading

Table of Contents