Chapter 5 Automatic-Aligning System
Please note that this chapter is only an instruction to AASII; for step-by-step instructions, please
refer to the following chapters: 08_A-3 CorelDraw Plug-In, 08_A-6 GreatCut, 08_A-7 Illustrator.
5.1
Introduction
The Jaguar IV series cutting plotters feature a standard Automatic-Aligning System (AAS II) to
guarantee precise contour cutting quality by detecting the registration marks printed around the
graphic.
Notice
Avoid any kind of light source horizontally illuminating the AAS module.
DO NOT take off the cover of AAS module while in operation.
Automatic-Aligning System
- PROHIBITED
- PROHIBITED
5-1
Jaguar IV User Manual
- ACCEPTABLE