GCC Technologies Jaguar IV Series User Manual page 20

Step 4
Put the bottom of machine in lateral, and position the Roll Holder Assembly beside the bottom
of the machine. Then, insert the M6 screws into the holes of Roll Holder support assembly
and tighten them with M6 L-shape screwdriver. Like Figure 2.3-3.
M6 screws
Roll Holder Assembly
Figure 2.3-3
Step 5
Place the two roll holders into the holes of Roll Holder Support (Figure 2.3-4). To install the roll
holder with damper, please refer to chapter 2.2, step 8 to step 10.
Step 6
The complete Desktop Media Support System will be shown as in Figure 2.3-5.
Installation
Screw holes
2-9
Roll Holders Figure 2.3-4
Figure 2.3-5
Jaguar IV User Manual