GCC Technologies Jaguar IV Series User Manual page 16

Step 6
Insert the roll holder support with the screws into the holes of the stand, and then tighten them
up as shown in
Figure 2.2-7
different holes.
Figure 2.2-7
Step 7
Place the roll holder 1 onto the roll holder support (
Roll holder 1
Installation
. You could decide roll holder support's position by inserting into
Figure 2.2-8
2-5
).
Figure 2.2-8
Roll holder 2
Jaguar IV User Manual
3 screws
Roll holder support
Roll holder support