Stand & Flexible Media Support System - GCC Technologies Jaguar IV Series User Manual

2.2 Stand & Flexible Media Support System (for J4-101S/132S/183S)
Step 1
Please examine supplied items in the accessory box of stand carton:
2 pieces of base beams
2 pieces of side beams
1 piece of stand beam
20 pieces of M6 screws
1 piece of M5 L-shape hexagon screw driver
1 piece of Installation Guide for Stand Set
Step 2
Remove the plotter body and the accessories from the shipped carton.
Assemble the base beam to the side beam with 2 screws to form a T-shape stand.
(See Figure 2.2-1)
Please pay attention to the direction of the base beam (the wheel on the front end of the
beam comes with a break while the rear one is on its own).
Front
Installation
Figure 2.2-1
Figure2.2- 2
2-2
Jaguar IV User Manual
Rear
Figure2.2- 3