GCC Technologies Jaguar IV Series User Manual page 43

9600, o, 8, 1, p
9600, e, 8, 1, p
19200, n, 7, 1, p
19200, o, 7, 1, p
19200, e, 7, 1, p
19200, n, 8, 1, p
19200, o, 8, 1, p
19200, e, 8, 1, p
Firmware To display the version number of Firmware and FPGA code.
Version
Select To select displayed languages on LCM panel in English,
Language Spanish, Italian, Deutsch, Portuguese, Polish, Turkish or
French.
Select Units Provide two-unit systems for users convenient.
Image Scale To adjust the image scale of media length and width that may
Length cause by the thickness of the media.
The Numerator is the ideal length, and the Denominator is
the actual length measured from the resultant.
For example, cutting a line with 500.0 mm length. The
procedure as follows:
Image Scale
1. Press the [LEFT ARROW] to choose the Numerator and
Width
select 500.0 mm,
2. Cut the length by sending a graph file,
3. Measure the length then use the [RIGHT ARROW] key to
choose the Denominator, then
4. Press [UP ARROW /DOWN ARROW] to change the
values of the actual length.
Scale Length Fixed scaling, for maintenance only.
Scale Width
The Control Panel
9600pbs, 8 Bits with ODD Parity
9600pbs, 8 Bits with EVEN Parity
19200pbs, 7 Bits with NO Parity
19200pbs, 7 Bits with ODD Parity
19200pbs, 7 Bits with EVEN Parity
19200pbs, 8 Bits with NO Parity
19200pbs, 8 Bits with ODD Parity
19200pbs, 8 Bits with EVEN Parity
3-8
Jaguar IV User Manual
English
cm/s; inch/oz; Metric
cm/oz; inch/gram
500/500
mm