Stand & Flexible Media Support System; Stand Installation (For Ep-60); Stand & Flexible Media Support System (For Ep-132S) - GCC Technologies Expert Pro Series User Manual

2.2 Stand & Flexible Media Support System
2.2.1 Stand Installation（for EP-60）
Please follow the procedures below for assembling the stand and the media
support system.
Step 1 Please examine the supplied items in the accessory box of the stand carton
before you install:
Item List：
1 Left side vertical stand
1 Right side vertical stand
1 Support for left side
1 Support for right side
1 Stand Beam
2 Bottom Stands with wheels
2 Sliding brackets for paper takeup
1 Hex Wrench (M5)Φ4
28 Socket flat head screws(M6*12L)
1 Installation Guide
Step 2
Position the Left side vertical stand perpendicularly to part
screws into the holes and tighten them to form a left side T-stand (Figure 2-1).
Repeat the same steps with the Right side vertical stand.
Installation
Left side vertical stand
Figure 2-1
2-2
Expert Pro User Manual
and put the
Bottom Stand with wheels