Paradyne 6512 Installation Instructions Manual page 12

Connecting a 2-Line Phone (with One or Two SuperLines)
Hardware Required (Supplied)
14-foot RJ11 phone cable
Hardware Required (Not Supplied)
Two additional RJ11 phone cables to connect Lines 1 and 2 of your 2-line phone to
your adapter.
Procedure
Use the following procedure and supporting figure to connect your SuperLine Adapter
to a single phone with two lines. This configuration can be used if you have one or two
additional phone lines through your SuperLine Adapter.
Line 1:
Plug one end of the 14-foot phone cable into the LINE jack on the adapter rear
panel.
Insert the other end of the phone cable into the wall jack.
Connect Line 1 of your 2-line phone into the BASE PHONE jack on the adapter
rear panel.
Line 2:
Connect Line 2 of the 2-line phone into the PHONE 1–2 jack on the rear of the
adapter.
Second Phone, Fax, Modem, or Line 3:
If you have purchased two SuperLines you can connect a second phone, fax,
modem, or line 3 of a 3-line phone into the PHONE 2 jack on the adapter rear
panel.
To complete your SuperLine Adapter installation, refer to
Your Existing Phones on page 17, and Applying Power to the Unit
Connecting Phone Filters to
12
on page 21.