Paradyne 6512 Installation Instructions Manual page 24

Ethernet Cable
The Ethernet interface connector uses an 8-pin, non-keyed modular plug.
Use the straight-through connection to connect to an Ethernet Hub. 24 AWG, Cat 5
cable is recommended.
8-Pin Straight-Through Connection
Pin # Function
1 10BaseT TX D+
2 10BaseT TX D–
3 10BaseT RX D+
4 & 5 Not used
6 10BaseT RX D–
7 & 8 Not used
Use an Ethernet crossover cable to connect your adapter directly to a PC with an
Ethernet NIC card. 24 AWG, Cat 5 cable is recommended.
Function
10BaseT TX D+
10BaseT TX D–
10BaseT RX D+
Not Used
Not Used
10BaseT RX D–
Not Used
Not Used
Pin #
1
2
3
4
5
6
7
8
Ethernet
Cable
Pin #8
Pin # Function
1 10BaseT TX D+
2 10BaseT TX D–
3 10BaseT RX D+
4 Not Used
5 Not Used
6 10BaseT RX D–
7 Not Used
8 Not Used
24
8-Pin
Plug
Pin #1
98-16056