Paradyne 6512 Installation Instructions Manual page 10

Connecting Multiple Phones, Faxes, or Modems
to Your Adapter
Hardware Required (Supplied)
14-foot RJ11 phone cable
Procedure
Use the following procedure and supporting figure to connect your SuperLine Adapter
with up to two additional phones, fax machines, or modems in the same room.
Existing Phone Line
Plug one end of the 14-foot phone cable into the LINE jack on the adapter rear
panel.
Connect the other end of the cable into the wall jack.
Connect your existing phone into the BASE PHONE jack on the adapter rear
panel.
NOTE:
If you lose power to your SuperLine Adapter, the phone connected to the BASE
PHONE jack will still be operational.
Second Phone, Fax, or Modem:
Connect a second phone, fax, or modem into the PHONE 1–2 jack on the adapter
rear panel.
Third Phone, Fax, or Modem:
Connect a third phone, fax, or modem into the PHONE 2 jack on the adapter rear
panel.
To complete your SuperLine Adapter installation, refer to
Your Existing Phones on page 17, and Applying Power to the Unit on page 21.
Connecting Phone Filters to
10