Paradyne 6512 Installation Instructions Manual page 21

Applying Power to the Unit
Procedure
After you have installed your SuperLine Adapter, use the following procedure to apply
power to your adapter.
Insert the power cord's round end into the jack labeled POWER on the adapter
rear panel.
Plug the transformer into an AC power outlet.
After power is applied, the adapter performs a power-on self-test. During the power-on
self-test, all front panel indicators light for one second and then turn off. Only the PWR,
LINE, and ETHERNET (if applicable) indicators remain lit. If any other indicators remain
Troubleshooting Your Adapter
lit, refer to
on page 7 for more information on SuperLine Adapter front panel indicators.
Congratulations, your SuperLine Adapter installation is now complete.
Power
P O
W
E R
P H
O N
E
2
P H
O N
E
1 -
2
E T
H E
R N
E T
Telephone
or Fax
on page 22. Refer to
21
B A
P H S E
O N
E
L I
N E
Front Panel Indicators