Adjustment
13
Parameter settings
.06
The separate parameter list for the machine describes how to select the user level and
13
Internet update of control P40 CD
.07
You need a dongle with the appropriate machine software to be able to perform a control
You can obtain an empty dongle using the order number 72-250 303-91.
The "DongleCopy" PC tool is needed to upload software onto the dongle.
58
change parameters (see chapter 1.1.2 Technician level).
update.
A description of how to perform an Internet update of control P40 CD as well
as the "DongleCopy" PC tool can be downloaded from the Internet address
https://partnerweb.pfaff-industrial.com/.