Gp 3 Control Panel - Xerox PHASER 3124 Service Manual

General Procedures and Information

GP 3 Control Panel

OPE Panel
1 Error LED
2 Online LED
3 Online key
Online Key
Printing a demo page
Printing a configuration page and menu map
(Phaser 3125 only)
Manual feeding
6-24
Table 1: Cancel Button
Indicates an error on the printer
Indicates the status of the printer
Cancels a print job.
Allows the printer to pick up media from the bypass tray.
Prints a configuration page.
Table 1: Online Key
Item
In Ready mode, press and hold the button for 2 seconds until
the error LED and online LED blinks slowly, then release.
In Ready mode, press and hold the button for 5 seconds until
the online LED blinks at a faster rate.
After loading the bypass tray, press the button to feed the
loaded media into the printer.
Note: When feeding from the bypass tray, ensure
the 'Manual Feed for Source' option is selected
from the software application.
09/06
Description
PHASER 3124 / PHASER 3125