Iq 9 Ghost (1) - Xerox PHASER 3124 Service Manual

IQ 9 Ghost (1)

Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Ghost occurs at 75.5 mm (3 inches) intervals of the OPC drum on the print.
PHASER 3124 / PHASER 3125
WARNING
Checks and Causes
1. Abnormal low temperature (below
10°C).
2. The life of toner cartridge, PL 1 has
expired, refer to GP 4.
3. The transfer roller, PL 4 has expired,
refer to GP 4.
4. Bad contacts due to contamination
of the terminals, PL 1 and the toner
cartridge contacts, PL 1, caused by
toner particles.
5. Bad contacts due to contamination
of the terminals, PL 1 and the HVPS,
PL 1, caused by toner particles.
09/06
Image Quality
Solutions
1. Turn the printer on and wait for
60 minutes before using the
machine.
2. Install a new toner cartridge, PL
1.
3. Check and install a new transfer
roller, PL 4 if necessary.
4. Clean the following parts:
• Toner cartridge contacts, PL 1.
• Terminals, PL 1.
Install new parts as necessary:
• Toner Cartridge, PL 1.
• HVPS, PL 1.
5. Clean the HVPS contact termi-
nals, PL 1. If the problem persists,
install a new HVPS, PL 1.
3-11