Table of Contents
Advertisement
WARNING
rider to loose control and fall or be thrown from the electric dirt bike if not applied
correctly. Practice using the brake in an unobstructed, open area to become familiar
with its function and until you can make smooth, controlled stops. Avoid skidding to
stop as this may cause you to lose control or damage the tire.
Chain, Chain Tensioner, Rear Brake and Rear
Tire Replacement
Tools required: Phillips screwdriver, 10mm wrench, 8mm wrench, and two (2) 15mm
wrenches. (not included)
1. With a Phillips screwdriver, remove the 3 bolts that secure the chain guard. Then
remove the chain guard.
The brake could be capable of skidding the tire and causing the
2. Use a Philips Screwdriver and
a 8mm wrench to loosen and
disconnect the brake housing anchor.
(Note: Keep the spacer and washers
together).
17
Advertisement
Table of Contents
