Table of Contents
Advertisement
Charger port
WARNING
pervision. Always disconnect your electric dirt bike from the charger before cleaning
with liquid.
WARNING
ventilated area, away from sparks, flames, smoking and combustibles.
Note: If your charger does not look like the one illustrated, your unit has been sup-
plied with an alternative charger. The specifications and charging procedure would
not change. The charger has a small window with one LED or two LEDs to indicate
the charge status. Refer to the illustration on the charger unit for the actual "charg-
ing" and "charged" status indications for your model charger.
Chargers have built-in overcharge protection to prevent the battery from being over-
charged.
Charger will get warm during use. This is normal for some chargers and is no cause
for concern. If your charger does not get warm during use, it does not mean that it is
not working properly.
1. Turn power OFF before
charging. Plug the charger
into the charger port on the
electric dirt bike.
Note: Be sure to properly
align the groove on the
charger input plug with the
corresponding socket on
the charger port; other-
wise, no charging action
will occur.
Rechargeable batteries are only to be charged under adult su-
Charging produces explosive gases. Charge battery in a well
2. Plug the charger into a
wall outlet. If the lights on
the charger do not light
up, check the power to the
outlet. If necessary, try a
different outlet.
13
Advertisement
Table of Contents
