Introduction, Safety And Warnings; General Warning - Dynacraft 8802-33 Owner's Manual

Edirt bike 24v/36v electric vehicles
Table of Contents

Advertisement

INTRODUCTION, SAFETY, AND
WARNINGS
ABOUT THIS MANUAL: This manual was written to help you get the most
performance, comfort, enjoyment and safety when riding your new electric dirt
bike. It is important for you to understand your new electric dirt bike. By reading this
manual before you or your child go out on your first ride, you will know how to get
the most from your new electric dirt bike. It is also important that your or your child's
first ride on your new electric dirt bike be in a controlled environment, away from
cars, obstacles, and other riders.

GENERAL WARNING:

Riding an electric dirt bike can be a dangerous activity, even under the best
of circumstances. Proper maintenance of your new electric dirt bike is your
responsibility and helps reduce the risk of injury. Certain conditions may cause
components to fail without fault of the manufacturer. The electric dirt bike can
and is intended to move and it is therefore possible to lose control, fall off and/or
get into dangerous situations that no amount of care, instruction or expertise can
eliminate. If such a thing does occur, you can become seriously injured or die, even
when using safety equipment and other safety precautions.
RIDE AT YOUR OWN RISK AND ALWAYS USE COMMON SENSE.
This manual contains many warnings and cautions concerning the consequences of
failing to inspect, maintain or properly use your electric dirt bike. Because any fall
can potentially result in serious injury or even death, we do not repeat the warning of
possible serious injury or death each and every time the risk of falling is mentioned
in this manual.
ALWAYS USE PROPER SAFETY EQUIPMENT AND RIDING ATTIRE
Always use appropriate safety equipment, such as a helmet, elbow pads, knee
pads, gloves, and wrist guards. A helmet is not only a good idea but may be legally
required in your community. To protect yourself or your child, the helmet must meet
CPSC, 16 CFR 1203, requirements and be worn correctly:
3

Advertisement

Table of Contents
loading

Table of Contents