MULTIQUIP PRO46 Operation And Parts Manual page 38

Trowel Arm Adjustment Tool (Optional)
If blades show uneven wear patterns or some tend to
wear out faster than others, the trowel arms may need to
be adjusted. A special tool is available (Figure 53) that will
adjust all of the trowel arms consistently. The Trowel Arm
Fixture P/N is 1817.
Figure 53. Trowel Arm Adjustment Fixture
PAGE 38 — PRO46 SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #1 (8/20/15)
FRESNO BRUSHES
NOTICE
Fresno brushes should be changed when they fail to
finish concrete in a satisfactory manner.
Fresno brushes are a vital part of finishing concrete. The
fresno brush is designed to finish concrete with a textured,
or decorative, look using the sides of the brush bristles, not
the ends. There are three different color-coded, textured
(stiffness) brushes compatible with this trowel unit: soft
(black), medium (orange), stiff (green).
If you need a replacement brush, or want a different
finished look to the troweling surface, consult the parts list
in this manual for part numbers and order them from your
Multiquip parts dealer or importer.
OPTIONS