Hipath; Telephone Number - Siemens optiPoint 300 basic Operation And Andministration Manual

HiPath

Telephone number

You must indicate if you intend to operate your unit in a HiPath en-
vironment.
5F – _
5F – 205
5F – 205 2
You can change the factory default if necessary.
1 = HiPath environment
2 = HiPath Off
You can display the telephone number (E.164 address) of your
unit and change it if desired. The default setting is zero.
5F – _
5F – 206
P2 022 12345
Configuration and administration
Service mode
Select HiPath setting
? Confirm
Change setting as
required
? Save change
Service mode
Select telephone number
setting
? Confirm
Change number as
required
? Save change
51