Hipath 8000 Functions; Feature Toggle Key - Siemens OpenStage 40 Operating Manual

HiPath 8000 functions

Step by Step
108
HiPath 8000 functions
The System supports a number of functions that you
can activate and deactivate from your phone.
The Hipath 8000 functions are only available if
the administrator has enabled the function "Serv-
er features" on the phone.
On multi-line telephones, the full scope of
HiPath 8000 functions is only available for the pri-
mary line.

Feature toggle key

You can pick a programmable sensor key and program it
as a feature toggle key for activating the "make line
busy" and "stop hunt" functions.
You can then use the programmable sensor key to acti-
vate or deactivate the relevant System function on the
server for this extension.
You can only program first-level programmable sensor
keys because those linked to LEDs are used to display
function status as either on (LED on) or off (LED off). The
LED indicates the status of the function on the server
and can therefore change without any of the programma-
ble sensor keys being pressed.
If one of the programmable sensor keys is pressed, you
can see the status of the function on the graphic dis-
play.
Example:
Switching between "Line busy" and "Line free" (see also
page 119).
Prerequisite: Your administrator configured a program-
mable sensor key with the function "Busy" ("make line
busy" for the hunt group)
S
Press the programmable sensor key.
"Line busy" appears on the graphic display, for instance,
and the key lights up.
R
Press the lit programmable sensor key once again to re-
lease the line.
"Line free" appears on the graphic display.
page 58.