Safety; For Your Safety; Protection Of The Telephone; Location Of The Telephone - Siemens optiPoint 300 basic Operation And Andministration Manual

Table of Contents

Advertisement

Safety

For your safety

Protection of the telephone

Location of the telephone

The IP telephone optiPoint 300 basic complies with the European
standard EN 60 950 which deals with the safety of information
technology appliances including electronic office equipment. This
device has been designed with safety in mind, thus protecting
both individuals and objects.
There is always the danger of small objects being swallowed by
young children. In the case of the optiPoint 300 basic, this applies
in particular to the connecting cord clip.
Please make sure that such items are not accessible to children.
Use only the enclosed power supply and the special LAN ca-
ble.
Never open the power supply enclosure.
The telephone must not be used in bathrooms, etc. as it is not
splashproof.
Before connecting or disconnecting the LAN cable or the
headset cord, pull the power plug out of the plug receptacle
first.
The telephone should be operated in a controlled environment
with an ambient temperature between 5˚C and 40˚C (41˚F and
104˚F).
Do not install the telephone in a room where large quantities
of dust accumulate; this can considerably reduce the service
life of the telephone.
Do not expose the telephone to direct sunlight or any other
source of heat, as this is liable to damage the electronic equip-
ment and the plastic casing.
Do not operate the telephone in damp environments such as
bathrooms.
Safety
8

Advertisement

Table of Contents
loading

Table of Contents