Listening To Music From A Bluetooth Device (Receiving) - Yamaha YSP-5600 Owner's Manual

Listening to music from a Bluetooth device (Receiving)

1
Press the key on the remote control.
Bluetooth is selected as an input source, and
"BLUETOOTH" is shown in the front panel display.
BLUETOOTH
• If a Bluetooth device has been connected before, the unit will connect to the
last connected device when the key is pressed. Terminate this
connection to connect a new device.
• If you are unable to select Bluetooth as an input source, be sure that
"Transmission" in the setup menu is set to "Off" (p. 83)
2
Turn on the Bluetooth function on the Bluetooth
device.
The operation varies depending on the device. Refer to
documentation supplied with the device.
3
Select "YSP-5600" in the Bluetooth device list on
the device.
If a passkey (PIN) is required, enter the number "0000".
YSP-5600
The indicator in the front panel display flashes while the
unit and Bluetooth device are being connected, and glows
steadily when the connection is established.
"Connect" is shown in the front panel display.
The indicator or a completion message is displayed on
the Bluetooth device.
4
Play back a song on the Bluetooth device.
• With some Bluetooth devices, this unit must be specified as the destination for
audio output.
PIN 0 0 0 0
• Setting "Network Standby" in the setup menu to "On" allows the unit to be turned
1 2 3
on and off with Bluetooth device operations (p. 82).
4 5 6
7 8 9
0
PLAYBACK ➤ Wireless playback of audio via Bluetooth connection
Flashes while Glows when the
processing a connection is
connection established
47
En