1 2 3 4 5 6
3
Attach the small wall mount brackets to the unit.
Screws (M4;
supplied with the
SPM-K30)
Small wall mount
bracket (Type B)
Screw hole
(left side)
4
Attach the safety wires to the small wall mount brackets (left and
right) to prevent the unit from falling.
Screws(M4;
supplied with
the SPM-K30)
Small wall mount
bracket (Type B)
Screw hole
(right side)
Slip one end through
Safety wire
the loop at the other end
Slip the safety wire
between the bracket and
the projector
PREPARATIONS ➤ a Installation
19
En