Listening To Music From Your Bluetooth Device; Pairing This Unit With Your Bluetooth Device; Connecting An Already-Paired Device Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha MUSICCAST WX-030 Owner's Manual

Wireless streaming speaker
Hide thumbs Also See for MUSICCAST WX-030:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device
(smartphone, digital audio player, etc.). Please also refer to the owner's manual of your Bluetooth device.

Pairing this unit with your Bluetooth device

■ Pairing (Registration)
1
(power)/CONNECT
4
-------
The unit's Room name is displayed where
"-------" is indicated above.

Connecting an already-paired device via Bluetooth

■ Connecting from the connecting device
A In the Bluetooth settings of the connecting device, turn Bluetooth on.
B From the Bluetooth connection list of the connecting device, choose this unit (the
Room name of this unit ☞ P.9).
The Bluetooth connection will be established, and the Bluetooth indicator will light.

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth
connection will be disconnected.
• Tapping
(power)/CONNECT to enter standby mode.
• Touching and holding
• Disconnecting the Bluetooth connection from the connecting device.
1
Power indicator
for 3 seconds.
A Turn on the unit.
The power indicator lights.
B On your connecting device (mobile device),
set Bluetooth to on.
C Perform Bluetooth pairing on the connecting
device.
For details, refer to the owner's manual of the connecting
device.
D From the Bluetooth connection list of the
connecting device, choose this unit (the
Room name of this unit ☞ P.9).
y
• Finish the operation from turning on the unit to completing
pairing in 5 minutes.
• If you are asked to enter a password, enter the numerals "0000."
Note
Check that the pairing process on the connecting device
has been completed. If the pairing process fails, start over
from step B. For details, see the connecting device's
owner's manual.
11
En

Advertisement

Table of Contents
loading

Table of Contents