Yamaha YSP-5600 Owner's Manual page 76

Dynamic Range
➜
Setup Menu Sound
Adjust this unit's dynamic range (difference between maximum and minimum volumes).
Settings
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Min/Auto
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard The dynamic range recommended for regular home use.
Max (default) Outputs sound without adjusting the dynamic range of the input signals.
• "Adaptive DRC" is automatically set to "Off" when the settings other than "Max" is selected.
DTS
➜
Setup Menu Sound
Configure the DTS decoder for use with input of DTS audio signals.
❑
Neural:X
Specify whether or not Neural:X is used to generate channels not present in input
sources.
Settings
Disable Neural:X will not be used.
Enable (default) Neural:X will be used.
• Neural:X is the DTS:X surround sound decoder.
❑
Increase the volume of dialog to make listening easier.
➜
Adjustable range
Dynamic Range
0 (default) to 6 (dB)
• This setting is effective only for playback of DTS:X input sources that support dialog control.
➜
DTS
Dialog Control
"Neural:X" and "Dialog Control" may be provided with a firmware update.
See our website for the latest information.
The following settings are available for the DTS decoder before "Neural:X"
and "Dialog Control" are provided with firmware update.
Configure the DTS Neo:6 decoder for use when DTS audio signals are input.
Settings
Neo:6 Cinema
Use the DTS Neo:6 decoder suitable for movies.
(default)
Neo:6 Music Use the DTS Neo:6 decoder suitable for music.
• The DTS Neo:6 decoder is disabled with stereo playback and target playback.
SETTINGS ➤ Setup menu
En
76