Network - Yamaha YSP-5600 Owner's Manual

Network

Problem
The network feature does not The network parameters (IP address) have not been obtained properly.
function.
"Not connected" is displayed with The wireless router's MAC address filter is enabled.
"Wireless (Wi-Fi)" configuration;
unable to connect to wireless
router (access point).
"Not connected" is displayed with The wireless router (access point) does not broadcast its SSID.
"Wireless (Wi-Fi)" configuration
using the WPS function ("WPS
Button" and "PIN Code") and
"Access Point Scan"; unable to
connect to wireless router
(access point).
"Not connected" is displayed with The wireless router (access point) uses WEP encryption.
"Wireless (Wi-Fi)" configuration
using the WPS function ("WPS
Button" and "PIN Code"); unable
to connect to wireless router
(access point).
Playback stops unexpectedly and The folder contains some files that cannot be played via the unit.
files cannot be played
continuously.
The unit does not detect the PC. The media sharing setting is not correct.
Some security software installed on your PC is blocking the access of the
unit to your PC.
The unit and PC are not in the same network.
The MAC address filter is enabled on the unit.
The files in the PC cannot be The files are not supported by the unit or the media server.
viewed or played back.
Cause
Enable the DHCP server function on your router and set "DHCP" in the
setup menu to "On" on the unit. If you want to configure the network
parameters manually, check that you are using an IP address which is not
used by other network devices in your network.
A connection cannot be established if the wireless router's MAC address
filter is enabled. Check wireless router (access point) settings and try a
different connection method.
A connection cannot be established if the wireless router (access point) is
configured so that it does not broadcast its SSID. Check wireless router
(access point) settings and try a different connection method.
A connection cannot be established using the WPS function. Try a different
connection method.
Delete or move files (including video or hidden files) that cannot be played
via the unit from the folder.
Configure the sharing setting and select the unit as a device to which music
contents are shared.
Check the settings of security software installed on your PC.
Check the network connections of the unit and PC, and then connect the
unit and the PC to the same network.
In "MAC Address Filter" in the setup menu, disable the MAC address filter
or specify the MAC address of your PC to allow it to access to the unit.
Use the file format supported by both the unit and the media server.
Remedy
APPENDIX ➤ Troubleshooting
See page
81
51, 81
54, 58
54, 58
–
61
–
–
81
61
97
En