Yamaha YSP-5600 Owner's Manual page 81

IP Address
➜
Setup Menu Network
Configure the network parameters (such as IP address).
❑
DHCP
Select whether to use a DHCP server.
Settings
The DHCP server is not used. Configure the network parameters
Off
manually. For details, see "Manual network settings".
The DHCP server is used to automatically obtain the unit's network
On (default)
parameters (such as IP address).
Manual network settings
1
Set "DHCP" to "Off".
2
Use the / keys to select a parameter type.
IP Address Specify an IP address.
Subnet Mask Specify a subnet mask.
Default Gateway Specify the IP address of the default gateway.
DNS Server (P) Specify the IP address of the primary DNS server.
DNS Server (S) Specify the IP address of the secondary DNS server.
3
Use the / keys to move the edit position and the
select a value.
4
Press the ENTER key.
➜
IP Address Setup Menu
The MAC address filter limits network devices that can be used to operate the unit.
When operating the unit via an app on a mobile device, specify the MAC address of the
device.
• Operation of the AirPlay function (p. 64) or DLNA-compatible device (p. 61) is not limited by this setting.
❑
Enable/disable the MAC address filter.
Settings
Off (default)
On
❑
Specify the MAC addresses (up to 10) of the network devices that will operate the unit
when "Filter" is set to "On".
1
2
3
/ keys to
MAC Address Filter
➜
Network
Filter
Disable the MAC address filter.
Enable the MAC address filter. In "MAC Address 1–10", specify the MAC
addresses of the network devices that will operate the unit.
MAC Address 1–10
Use the / keys to select an MAC address number (1 to 10).
Use the / keys to move the edit position and the
select a value.
Press the ENTER key.
➜
MAC Address Filter
/ keys to
SETTINGS ➤ Setup menu
En
81