Connecting A Tv - Yamaha YSP-5600 Owner's Manual

1 2 3 4 5 6
b Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
• This unit supports HDCP version 2.2, a copy protection technology. To enjoy playback of 4K video, connect the unit to the HDMI IN jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.
TVs that support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied).
HDMI OUT (ARC) jack
OUT
HDMI
(ARC)
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
UPDATE ONLY NETWORK
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN IR-OUT RS-232C
CONNCETOR OUT AUX1
The unit (rear)
When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI
control function (p. 77).
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio
cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio
signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
• Use an ARC-compatible HDMI cable.
Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.
HDMI input
ARC-compatible
HDMI
(ARC)
HDMI
The unit (rear)
TV
• If the TV has no optical jack
TVs that do not support Audio Return Channel (ARC)
HDMI OUT (ARC) jack
OUT
HDMI
IN 1
(ARC)
(HDCP2.2)
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
O
TV
UPDATE ONLY NETWORK
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN IR-OUT RS-232C
CONNCETOR OUT AUX1
TV jack
1. Remove the cap 2. Check the direction of
the plug
Connect the audio output jack on the TV to the AUX1 (analog) input jack or AUX2 (digital coaxial) jack on
the unit, and set "TV Input" in the setup menu to "Analog [AUX 1]" or "Coaxial [AUX 2]" accordingly (p. 77).
TV audio can be played through the unit by pressing the TV key on the remote control.
PREPARATIONS ➤ b Connecting a TV
HDMI input
HDMI
HDMI
OPTICAL
O
Audio output
TV
(digital optical)
22
En