Table of Contents
Advertisement
Installation
2.5
Mechanical installation
The RLI20 is intended to be mounted in an electrical control
cabinet or similar environment. It is constructed with IP40
protection and therefore needs to be protected from harsh
environmental conditions.
For connector/cable clearance purposes, allow 100 mm (4 in)
from the front face of the RLI20.
Note: Using the fixings supplied with the unit (M4 x 5 cap
head screws and 4 mm plain washers) ensures that earthing is
achieved directly though the brackets.
Mounting holes
7 mm x 9.5 mm
Dimensions in
mm (in)
7
Advertisement
Table of Contents
