Top Heating Surfaces And Linkage - Baxi Bioflo 12 kW Granite User Operating Instructions Manual

Care, cleaning and maintenance
3.8

Top heating surfaces and linkage

These parts are automatically checked and cleaned as part of the annual maintenance by WINDHAGER Customer
Service or the customer service PARTNER.
Always switch the boiler off first with the ON/OFF button (Fig. 142) and wait until burnout mode has
finished. It is essential to let the boiler cool down before cleaning.
– Remove the front cover (tip: open the cover of the reserve supply container first) – Fig. 143.
Fig. 142 Switching off FireWIN
– Unscrew two wing nuts from the heating surface cover and remove the complete cover – Fig. 144.
– Remove the jet protection plate (tip: vacuum out fly ash first using a vacuum cleaner) – Fig. 145.
Fig. 144 Removing the wing nuts and cover
– Vacuum down the top heating surfaces and linkage or clean with a cleaning brush – Fig. 146.
– Only with FireWIN Klassik and Premium: Push on the cleaning lever of the heating surfaces at the right side
and move it forwards and backwards several times –– Fig. 147 .
Fig. 146 Cleaning top heating surfaces and linkage
–– Empty the ash pan for the heating surfaces (accessory) or remove the ash from the duct – Fig. 148.
Fig. 148 Removing the ash pan(s) or removing the ash
Fig. 143 Removing the cover
Fig. 145 Removing the jet protection plate
Fig. 147 Connecting the lever and operating it several times
48