Baxi Bioflo 12 kW Granite User Operating Instructions Manual page 48

Care, cleaning and maintenance
– Remove both knurled screws (Fig. 138) and fold open the inspection cover (Fig. 139).
– Remove dust (bridge formation) from the container and from both Fill level switch (proximity switch) using
a vacuum cleaner.
– Close the inspection cover again and screw it on with knurled screws.
Fig. 138
– Remove both knurled screws at the back from the coarse filter (Fig. 140) and remove the coarse filter (Fig.
141).
– Remove pellets and dust using a vacuum cleaner.
– Put the coarse filter back on and screw it on with knurled screws.
Fig. 140
Assembly:
By working through these steps in reverse order.
Removing the knurled screws
Removing the knurled screws
Fig. 139 Folding open the inspection
cover, removing dust
Fig. 141 Removing the coarse filter,
removing pellets and dust
47
Fill level switch (proximity switch)