Pellet Consumption Total; Flue Gas Temperature; Boiler Temperature Setpoint; Current Boiler Output - Baxi Bioflo 12 kW Granite User Operating Instructions Manual

Operation

2.7.3 Pellet consumption total

The total amount of pellets consumed is displayed in tonnes – Fig. 41.
Note:The „Pellet consumption total" is a calculated value and can differ from
the actual value by ±15%.

2.7.4 Flue gas temperature

If a flue gas temperature sensor (accessory) is connected, this function displays
the current flue gas temperature – Fig. 42.
The flue gas temperature is measured directly on the flue outlet. It may
therefore deviate from a standard measurement.

2.7.5 Boiler temperature setpoint

The display indicates the boiler temperature setpoint as calculated by the con-
trol system. This setpoint is used to control the burner – Fig. 43.

2.7.6 Current boiler output

The current boiler output is displayed in %. The boiler output (modulation
mode) can be set from 30 % to 100 % – Fig. 44.

2.7.7 Display module software version

The current software version of the display module (InfoWIN) is displayed –
Fig. 45.

2.7.8 Firing automate software version

The current software version of the firing automate (main PCB) is displayed –
Fig. 46.

2.7.9 Boiler model

The boiler model of the FireWIN is displayed – Fig. 47.
19
Pellet consumption
total
1.30
Fig. 41 Back
Flue gas temperature
114
Fig. 42 Back
Boiler temperature
setpoint
63
Fig. 43
Back
Current
boiler output
70
Fig. 44 Back
Software version -
display module
4.00
Fig. 45 Back
Software version
firing automate
4.10
Fig. 46 Back
Boiler model
Pellet boiler 120K
Boiler
Fig. 47 Back
t
°C
°C
%
0