Operating Modes; Off Mode; On Mode, Lighting On, Self-Test, Lighting Off - Baxi Bioflo 12 kW Granite User Operating Instructions Manual

Operation
2.5

Operating modes

2.5.1 OFF mode

The boiler is switched off when in OFF mode. The display and all
buttons, with the exception of the ON/OFF button, do not function.
The LED on the InfoWIN is not illuminated – Fig. 13.
2.5.2 ON mode, lighting ON,
self-test, lighting OFF
Press the ON/OFF button, lighting and display are switched on and
the self-test starts automatically – Fig. 14.
Self-test:
Sensors, switches and motors are checked during the self-test.
After a successful self-test, the display shows an operating phase
and the boiler water temperature (standard display). The LED sig-
nal lamp lights green and the desired functions can be selected
using the buttons – Fig. 15.
If the self-test was unsuccessful, an information message (e.g. infor-
mation, fault, alarm) is displayed (see sections 4.3 and 4.4).
Lighting ON/OFF
The display lighting switches off automatically after 10 min. (Fig.
16). Pressing one of the six buttons switches the lighting on again
for 10 min.
InfoWIN identifies and stores the various operating modes and sta-
tes. Once the system is switched on, other operating modes may
also be displayed instead of the standard display, such as manual
operation or solid fuel/buffer mode; malfunctions are also display-
ed. These operating modes and states are described later in these
instructions.
Fig. 13
Fig. 14
Fig. 15
Fig. 16
13
RESET
OFF mode
Self-test active
.....
(Animated symbol)
RESET
Self-test
Boiler temperature
42
°C
(Operating phases)
Info Menu
RESET
Standard display
Boiler temperature
42
°C
(Operating phases)
Lighting ON
RESET
Display lighting OFF
5s
5s
5s
5s