Operation
„with start time"
A time can be set here in the „ Time profile feed" menu item for fil-
ling the reserve supply container if the „with start time" setting is
active in the „Feed operating mode" menu item (see section
2.8.1.3). The reserve supply container is filled every day at the set
time. Interim fills are also performed if the filling amount is not suf-
ficient for 24 hours.
Factory setting „Feed start time": Start 20:00
Pressing the + or – button changes the time in 1 min. steps – Fig. 86.
Save the changed time by pressing the Yes button – Fig. 87. The
display shows „Parameter is saved" for a few seconds (Fig. 88) and
then changes back to the previous level – Fig. 89.
The menu item or sub-menu item is exited by pressing the Back
button (Fig. 89) or after a delay of 45 seconds.
Fig. 86
Fig. 87
Fig. 88
Fig. 89
30
30
Feed start time
Start
20:00
5s
Save
–
Yes
No
+
RESET
Feed start time
Start
20:00
5s
Save
–
Yes
No
+
RESET
Parameter is
saved
5s
.....
(Animated symbol)
RESET
Boiler cleaning
Time
Feed operating mode
5s
Time profile feed
Probe switching
Time profile ash comp.
Choose
Back
RESET