Baxi Bioflo 12 kW Granite User Operating Instructions Manual page 34

Operation
2.8.1.5 Probe switching
If FireWIN is equipped with a fully automated pellet feed, it is pos-
sible to set here which probe is used for sucking pellets from the
pellet storage room. There are four different setting options:
– Automatic: Removal from all 3 probes, automatic switching.
– Only probe 1: Removal from probe 1 only, no switching
– Only probe 2: Removal from probe 2 only, no switching
– Only probe 3: Removal from probe 3 only, no switching
Note: If „Pellet feed system, operation with 2 probes" is set in the
„Service level" , the option of „Only probe 3" is not displayed here.
Pressing one of the six buttons switches the lighting and display
on – Fig. 98.
Press the Menu button – Fig. 99.
Confirm the selected menu item „Operator level" by pressing the
Choose button – Fig. 100.
Use the arrow buttons to select the „Probe switching" sub-menu
item – Fig. 101.
Confirm the selected sub-menu item „Probe switching" by pressing
the Choose button – Fig. 102.
1) Only displayed if a feed system is present and if this has been adjusted by a
trained service technician in the service level.
1)
Fig. 98
Fig. 99
Fig. 100
Fig. 101
Fig. 102
33 33
Boiler temperature
42
°C
5s
(Operating phases)
Lighting ON
RESET
Boiler temperature
42
°C
5s
(Operating phases)
Info Menu
RESET
Operator level
Service level
5s
Choose Back
RESET
Boiler cleaning
Time
Feed operating mode
5s
Time profile feed
Probe switching
Time profile ash comp.
Choose Back
RESET
Boiler cleaning
Time
Feed operating mode
Time profile feed 5s
Probe switching
Time profile ash comp.
Choose Back
RESET