Commissioning The Boiler; Adjusting The Ch And Dhw Flow Temperature; Operating Modes - Baxi nuvola duo-tec+ Instruction Manual For Users And Fitters

1. COMMISSIONING THE BOILER

Select the required heating mode (section 1.2).
Key to BUTTONS
DHW temperature adjustment
(+ to increase the temperature and – to decrease it)
(+ to increase the temperature and – to decrease it)
Boiler operating information
Operating mode:
Off – Reset – Exit menu/functions
Key to SYMBOLS
Off: heating and DHW disabled
Fault preventing the burner from lighting
Technical Service Centre call-in
Fault in progress

1.1 ADJUSTING THE CH AND DHW FLOW TEMPERATURE

Press and
HEATING
When connected to an External Sensor,
DHW

1.2 OPERATING MODES

SYMBOL
OPERATING MODE
DISPLAYED
DHW
DHW & HEATING
HEATING ONLY
)
.
To enable the appliance in DHW -
and choose one of the three available modes.
enabled, press
27
Burner lit
DHW operating mode enabled
Heating mode enabled
Programming menu
Boiler information menu
Set unit of measurement (SI/US)
or press
7219624.01 (1-04/15)
appears on the