Trip Computer - Fiat Punto Owner's Handbook Manual

TRIP COMPUTER

Introduction
The "Trip computer" is used to display in-
formation on car operation when the key
is turned to MAR. This function allows
you to define two separate trips called
"Trip A" and "Trip B" for monitoring the
car's "complete journey" in a reciprocal-
ly independent manner.
Both functions are resettable (reset – start
of a new journey).
"Trip A" shall be used to display the fig-
ures relating to:
– Outside temperature;
– Range
– Distance travelled
– Average consumption
– Instant consumption
– Average speed
– Travel time (driving time).
30
"Trip B", available on multifunction display
only, shall be used to display the figures
relating to:
– Distance travelled B
– Average consumption B
– Average speed B
– Travel time B (driving time).
NB "Trip B" functions may be excluded
(see "Trip B on"). "Range" and "Instant
consumption" parameters cannot be reset.
Values displayed
Outside temperature
Indicates the temperature outside the
vehicle passenger compartment.
Range
This indicates the distance which may be
travelled with the fuel in the tank assum-
ing that driving style does not change. The
display will show the reading "- - - -" when
the following events take place:
– value lower than 50 km (or 30 mi)
– car left parked with engine running for
a long time.
Distance travelled
This value shows the distance covered
from the start of the new journey.
Average consumption
This value shows the average consump-
tion from the start of the new journey.
Instant fuel consumption
Indicates the fuel consumption. The val-
ue is constantly updated. The message
"- - - -" will appear on the display if the car
is parked with the engine running.
Average speed
This value shows the car's average speed
based on the overall time elapsed since the
start of the new journey.
Journey time
This value shows the time elapsed since
the start of the new journey.
IMPORTANT If information is not avail-
able, the message "- - - -" will appear in-
stead of the Trip Computer values.
Counting of the different values will be re-
sumed regularly when normal operation
is restored. This will not cause any reset-
ting of the values displayed before the fail-
ure nor the starting of a new journey.