Fiat Punto Owner's Handbook Manual page 147

❒ if you get a pressure reading of at least
1.8 bar, restore the proper pressure
(with engine running and handbrake on)
and restart;
❒ drive with the utmost care to the near-
est Fiat Dealership.
WARNING
Remember to inform the
workshop that the tyre has
been treated with a quick repair kit.
Give the instruction booklet to the
personnel charged with handling the
treated tyre.
146
fig. 13
FOR CHECKING AND
RESTORING PRESSURE ONLY
The compressor may also be used for
restoring pressure only. Release the fast
coupling and connect it directly to the tyre
valve fig. 13; in this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.
F0M0365m fig. 14
CYLINDER REPLACEMENT
PROCEDURE
To replace the cylinder, proceed as fol-
lows:
❒ disconnect A-fig. 14;
❒ turn the cylinder anticlockwise to lift
it out;
❒ insert the new cylinder and turn it
clockwise;
❒ connect A to the cylinder and fit the
transparent tube B into its allocated
space.
F0M0206m