Odometer/Trip Computer; Speedometer - Fiat 124 SPIDER 2020 Owner's Manual

Odometer/Trip Computer

The display mode can be changed from
odometer to "Trip computer A" to "Trip
computer B" and then back to odometer by
pushing the selector.
The selected mode will be displayed.
Abarth Odometer/Trip Reset Button
1 — Odometer/Trip Reset Button
Odometer/Trip Reset Button
1 — Odometer/Trip Reset Button
Odometer
The odometer records the total distance the
vehicle has been driven.
Trip Computer
The trip computer can record the total
distance of two trips. One is recorded in
"Trip A", and the other is recorded in "Trip
B".
For instance, "Trip A" can record the
distance from the point of origin, and "Trip
B" can record the distance from where the
fuel tank is filled.
When "Trip A" is selected, pushing the
selector again within one second will change
to "Trip B" mode. When "Trip A" is selected,
TRIP A will be displayed. When "Trip B" is
selected, TRIP B will be displayed.
The trip computer records the total distance
the vehicle is driven until the meter is reset.
Return it to "0.0" by depressing and holding
the selector for one second or more.
Use this meter to measure trip distances and
to compute fuel consumption.
NOTE:
Only the trip records tenths of miles (kilome-
ters).
Trip Computer Reset
The trip computer will be erased when:
The power supply is interrupted (blown

fuse or the battery is disconnected).
The vehicle is driven over 9999.9 miles.


Speedometer

The speedometer indicates the speed of the
vehicle.
81