Trip Computer; Firefly Hybrid Version) - Fiat 500 Manual

–
press the + or button to select;
press the MENU button
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Exit Menu
This is the last function that closes the
cycle of settings listed in the menu
screen.
Pressing the MENU button
will return the display to the standard
screen without storing.
–
Press the button to go back to the
first menu option ("Speed Beep").
HEADLIGHT ALIGNMENT
With the ignition key at MAR and
dipped beam headlights on, press
the – button to adjust the headlights
upwards and the button to adjust the
headlights downwards.

TRIP COMPUTER

briefly to
(Except the 1.0
FireFly Hybrid
version)
GENERAL INFORMATION
The Trip computer is used to display
information on car operation when the
ignition key is turned to MAR.
This function allows you to define
briefly
two separate trips, called "Trip A"
and "Trip B", for monitoring the car's
"complete mission" (journey) in a
reciprocally independent manner and,
for versions/markets where provided,
"Instant info" and "Best average
consumption".
Both Trip A and Trip B can be zeroed
(reset - start of a new journey).
"Trip A" can be used to display the
values relating to:
Range (for versions/markets, where
provided)
Travel Distance A
Average Fuel Consumption A
Current consumption (for
versions/markets, where provided)
Average Speed A
Travel time (driving time). "Trip B"
shall be used to display the figures
relating to:
Travel Distance B
Average Fuel Consumption B
Average Speed B
Travel Time B (driving time)
NOTE "Trip B" may be excluded.
"Range" and "Current Consumption"
values cannot be reset.
"Best average consumption": in ECO
mode, displays a screen summarising
the best average consumption (where
provided). The icon indicates the
best performance. This information can
be reset by resetting Trip A.
TRIP BUTTON
The TRIP button is located on the right-
hand stalk fig. 84. With the ignition key
turned to MAR, this button allows you
to view the previously described values
and also zero them to begin a new
mission:
brief press to access the various
parameter displays;
long press to reset and then start a
new mission.
84
F0S0090
65