Changing A Bulb - Fiat Punto Owner's Handbook Manual

CHANGING A BULB

GENERAL INSTRUCTIONS
❒ When a light is not working, check that
the corresponding fuse is intact before
changing the bulb. For the location of
fuses, refer to the "Changing a fuse"
paragraph in this section;
❒ before changing a bulb check the con-
tacts for rusting;
❒ burnt bulbs must be replaced by others
of the same type and wattage;
❒ for safety reasons, always check the di-
rection of the headlight beam after
changing a bulb.
Halogen bulbs must be han-
dled holding the metallic part
only. Touching the transpar-
ent part of the bulb with your
fingers may reduce the intensity of the
light emitted and even compromise the
longevity of the bulb itself. In the event
of accidental contact, wipe the bulb
with an alcohol-soaked cloth and leave
to dry.
WARNING
Modifications or repairs to
the electrical system (ECUs)
that are not carried out properly or
do not take the system's technical
specifications into account can cause
malfunctions leading to the risk of fire.
WARNING
Halogen bulbs contain pres-
surised gas which may cause
small fragments of glass to be pro-
jected outwards if the bulb is broken.
IMPORTANT The internal surface of the
light may appear slightly misty: this does
not indicate a fault, and is actually caused
by low temperature and the degree of hu-
midity in the air. Misting will rapidly dis-
appear when the headlights are switched
on. The presence of drops inside the head-
lights indicates infiltration of water. Go to
a Fiat Dealership.
TYPES OF BULBS
Various types of bulbs are fitted to your
car:
A Glass bulbs: clipped into position. Pull
to remove.
fig. 15
B Bayonet-type bulbs: to remove from
its holder, press the bulb in and turn
it anti-clockwise.
C Tubular bulbs: release them from
their contacts to remove.
D-E Halogen bulbs: to remove the bulb,
release the clip holding the bulb in
place.
F0M0207m
147