Fiat Punto Owner's Handbook Manual page 151

fig. 18
DIPPED BEAM / MAIN BEAM
HEADLIGHTS fig. 18
To change the bulb, proceed as follows:
❒ remove the snap-fitted rubber cap A,
as shown by the arrow;
❒ disconnect the central electric connec-
tor and release the bulb holder catch;
❒ remove the bulb B and replace it;
❒ fit the new bulb, aligning the outlines of
the metallic part with the grooves on
the reflector;
❒ refit the bulb holder catch and recon-
nect the electrical connector;
❒ refit the cap A, ensuring that it locks in-
to place.
150
F0M0180m fig. 19/a
DIRECTION INDICATORS
Front fig. 19/a – 19/b
To change the bulb, proceed as follows:
❒ steer the right/left wheel outwards;
❒ turn the catch A-fig. 19/a as shown by
the arrow, then lift the access flap B;
❒ remove the bulb holder cover C-fig.
19/b by turning it anti-clockwise;
F0M0261m fig. 19/b
❒ remove the bulb D by pushing it in gen-
tly and turning anti-clockwise ("bayo-
net" clamping), then replace it;
❒ refit the bulb holder cover C by turning
it clockwise and locking it properly;
❒ close the flap B-fig. 19/a and then turn
the catch A.
F0M0181m