Fiat Punto Owner's Handbook Manual page 27

Audio information
(See sound system)
With this function the display shows in-
formation relevant to the sound system.
– Radio: selected radio station frequency
or RDS message, automatic tuning acti-
vation or AutoSTore;
– CD, MP3: track number;
– CD Changer: CD number and track
number;
To show the sound system information in
the display (On) or clear it (Off), proceed
as follows:
– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);
– press + or – to make your choice;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
26
Automatic central door locking
with car running (Autoclose)
When activated (On), this function auto-
matically locks the doors when the car
speed exceeds 20 km/h.
To activate (On) or deactivate (Off) this
function, proceed as follows:
– briefly press MENU ESC to display
a submenu;
– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);
– press + or – to make your choice;
– briefly press MENU ESC to go back to
the submenu screen or hold the button
down to go back to the main menu with-
out saving.
– hold MENU ESC down again to go
back to the standard screen or main
menu, depending on where you are in the
menu.
Setting measurement units
(Units of measurement)
With this function it is possible to set the
measurement units through three sub-
menus: "Distance", "Consumption" and
"Temperature".
To set the desired measurement unit, pro-
ceed as follows:
– briefly press MENU ESC to display the
three sub-menus;
– press + or – to switch between the
three sub-menus;
– select the required option and then
press MENU ESC briefly;
– if selecting "Distance": briefly press
MENU ESC and the display will show
"km" or "mi" (depending on the previous
setting);
– press + or – to make your choice;
– if selecting "Consumption": briefly press
MENU ESC and the display will show
"km/l", "l/100km" or "mpg" (depending on
the previous setting);