Trip Computer - Fiat 500X Owner's Handbook Manual

Safety & Assistance
For possible adjustments see
paragraph Uconnect™ in the
dedicated chapter.
Lights
Select item "Lights" to make the
following adjustments: "Interior Ambient
Lights", "Headlight Sensor", "Follow
me", "Illuminated Approach", "Auto
high beams", "Daytime Lights".
Doors & Locks
Select item "Doors & Locks" to make
the following adjustments: "Autoclose",
"Aut. unl. on exit", "Flash Light
w/Lock", "Horn with Lock", "Horn with
remote start", "Remote Unlock", "Door
Unlock" (versions with Keyless Entry),
"Keyless Entry".
NOTE With the Uconnect™ system,
some Menu items are shown and
managed on the display of the latter
and not on the instrument panel display
(refer to the Multimedia chapter or to
the supplement available online).

TRIP COMPUTER

The "Trip computer" is used to display
information on car operation when the
ignition device is at MAR.
This function has two separate
memories, "Trip A" and "Trip
B", where the data for the car's
"complete journeys" (trips) is recorded
independently from each other.
The "Instant information" screens show
the following quantities:
Current Consumption
Range
"Trip A" and "Trip B" are used to
display the values relating to:
Travel Distance
Average fuel consumption
Average Speed
Trip time (driving time)
55
To reset the values, press and hold
down the OK fig. 55 button on the
steering wheel.
NOTE "Range" and "Instantaneous fuel
consumption" parameters cannot be
reset.
NOTE Instantaneous consumption is
not shown on the instrument panel
when the "Idle Coasting" function is
activate and the dedicated message
indicating that "Sailing" mode is
activated appears.
F1B0726
47