Trip Computer; Trip Button; Trip Functions; Values Displayed - Fiat 500 ABARTH 2018 Owner's Manual

84 GETTING TO KNOW YOUR INSTRUMENT PANEL

TRIP COMPUTER

The Trip Computer is located in the instrument cluster. It
displays trip information such as: trip information, range,
fuel consumption, average speed, and travel time.

Trip Button

The TRIP button, located on the right steering column
stalk, can be used to display and to reset the previously
described values.
• A short button push displays the different values.
• A long button push resets the system and starts a new
trip.

Trip Functions

Both trip functions are resettable (reset — start of new trip).
"Trip A" can be used to display the figures relating to:
• Trip Distance A
• Average Fuel Economy A
• Average Speed A
• Travel Time A (Driving Time)
"Trip B" can be used to display the figures relating to:
• Trip Distance B
• Average Fuel Economy B
• Average Speed B
• Travel Time B (Driving Time)
"Current Trip" can be used to display the figures relating
to:
• Range
• Instantaneous Fuel Consumption
NOTE: "Trip B" functions may be excluded (see "Trip B
Data"). "Range" and "Instantaneous Fuel Consumption"
cannot be reset.

Values Displayed

Range
This indicates the distance which may be traveled with the
fuel remaining in the tank, assuming that driving condi-
tions will not change. The message "----" will appear on the
display in the following cases:
• Distance less than 30 miles (or 50 km).
• The vehicle is parked for a long time with the engine
running.