Using Csafe - Matrix T3x Series Owner's Manual

3.0 O D
VERLAY ESCRIPTION AND
P4 LOW ELEVATION LEARN MODE (EDIT)
This variable controls the low limit for the elevation of the treadmill.
P5 HIGH ELEVATION LEARN MODE (EDIT)
This variable controls the the high limit for the elevation of the treadmill.
UNITS (EDIT)
P6
Changes from Standard (Miles) to Metric (Kilometers).
Unit change will force unit dependent variables to revert to their default values.
P7 LIMIT TIME (EDIT)
This variable controls the program maximum time.
P8 USER TIME (EDIT)
This variable controls the default program time.
P9
SET WEIGHT (EDIT)
This variable controls the default weight used in the calorie calculations.
Sets to default on unit change.
Displayed in native units (kilorgram or pounds)
P10
MACHINE (EDIT)
Controls the product name.
P11
TOTAL TIME
Displays total accumulated time.
Accumulated time is not editable, for display only.
P12
TOTAL DISTANCE
Displays total accumulated distance.
Accumulated distance is not editable, for display only.
Displayed in native units (miles or kilometers).
P13 VERSION
Displays the product's software version.
Version is not editable, for display only.
P14 LANGUAGE
Language in which information is displayed.
C S
USTOM ETTINGS
P15 USER SPEED (EDIT)
Controls the starting speed for all programs (minimum speed not affected).
Displayed in native units (miles per hour or kilometers per hour).
Reverts to default value on unit change.
PRODUCT TEST
Test the product.
AUTO CHECK
Run auto calibration to calibrate speed and incline after assembly or to recalibrate speed
and incline values.
DESCRIPTION
ADDRESS
P0 low speed learn mode
P1 high speed learn mode
P2 middle speed learn mode
P4 low elevation learn mode
P5 high elevation learn mode
P6 units
P7 limit time
P8 user time
P9 set weight
P10 machine
P11 total time
P12 total dist
P13 version
P14 language
P15 user speed
Product Test
Auto Check
NOTE: P0, P1 and P2 are auto start. The belt will start moving once the SELECT key is
pressed. Once the value is saved press the ELEVATION UP or DOWN key to increase the
engineering variable.

3.4 USING CSAFE

Matrix is the leader in entertainment availability. On the back of the console is an RJ45
receptacle. They are marked CSAFE IN.
5
DEFAULT MIN VALUE MAX VALUE
VALUE
77
600
300
55
200
MPH MPH
90:00:00 10:00 90:00:00
20:00 10:00 90:00:00
KPH:80/MPH:150 KPH:22/MPH:50 KPH:180/MPH:400
Matrix T3x Matrix T3x JOHNSON T8000
English English Holland
1.0 .5
KPH
1.5