Scanning Two-Sided Originals (2-Sided Original) - Canon imageRUNNER 3300 series Function Manual

Scanning Two-sided Originals
With this function you can specify that the machine automatically turns over two-sided
originals placed in the feeder to scan each side separately or that it prompts you to scan the
second side of an original placed on the platen glass.
2
IMPORTANT
•
When the machine is operating in the Two-sided Original mode, you cannot use the Two-page
Separation, Booklet Scanning or Image Combination modes.
•
Place the original horizontally when scanning originals such as LTRR and STMTR size. If these
originals are placed vertically, the back side of the print is printed upside down.
1
2
3
2-24

Scanning Two-sided Originals (2-sided Original)

Select the desired mail box number to display the Document
Selection screen, and press "Scan."
When you select a mail box set with a password, enter the password after selecting the
mail box, and press "OK."
The Scan screen is displayed.
Place the original, and press "2-sided Original."
Select the type of original, and press "OK."
The specified mode is set and the display returns to the Scan screen.
(2-sided Original)