Latch Indicator; Door Strike; Outer Door Glass - Electrolux EIGD55H Technical & Service Manual

Component Teardown
Latch Indicator Removal
The latch indicator is secured by retaining latches to the
interior of the door assembly.
To remove the latch indicator:
1. Remove door assembly from unit.
2. Remove the latch plate.
3. Grasp the indicator on the latch side between finger
and thumb and rock it upward, pivoting away from
the center of the glass. (See Figure 4-7)
4. Gently push the indicator toward the center of the
lens to release the tab.
5. Rock the tab upward. (See Figure 4-8)
6. Pull the indicator out and remove from unit.
(See Figure 4-8)
Door Strike Removal
The door strike is secured with two screws to the front
panel.
To remove the door strike:
1. Open the door to a 90 degree angle.
2. Using a #2 square bit screwdriver, extract the two
screws securing the door strike to the front panel.
(See Figure 4-9)
Outer Door Glass Removal
The outer door glass is secured with retaining latches to
the door assembly.
To remove the outer door glass:
1. Remove door assembly from unit.
2. Remove the latch plate.
3. Remove retaining covers.
4. Release the retaining latches around the door
assembly that secure the outer door glass to the
door assembly. (See Figure 4-10)
Retaining Latches
4-4
Figure 4-7.
Figure 4-8.

Door Strike

Screws
Figure 4-9.
Figure 4-10.